In this report we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and tricks that you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the home, you will need to get them some particular dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the setup which will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape out of the cardboard, so you will need to cut around the edge of the mask so that you get something that resembles a cone. The most important thing here is to be realistic with what kind of paper plate which you’re using.
Then you’ll need to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can make certain that nothing will leak once you put the mask on. Be sure that the edges are cut so the edges aren’t sharp, as this may damage the edges of the mask.
Glue oxygen mask for dog it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You will want to start with one side of the mask first, so you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.
Don’t fret too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint after you are done, so you don’t end up with smudges or smears on your dog.
Then it is time to glue the mask on your dog’s head. First you will need to make sure that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may start to glue the mask onto the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and fold it over. Make certain it’s quite strong and then use your hands to ensure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you’ve got the mask snugged firmly onto the face of your dog. Do not make the folds too big or else it might look messy. As soon as you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask onto the dog. Be sure the ears are flat and make sure that it is not too short or long as this will cause some issues with the mask slipping off the dog’s face.
If you’re using a dog mask as your dog protection, you will have to do some sanding to make certain it is secure on your dog. You can do this by sanding off any excess paper that may have been eliminated from your mask.